Description
Installation ionizer for swimming pools, spas, aquariums and ponds Adtecso.
The ADTECSO installation ionizer is a piece of equipment designed for water conditioning by means of an electrolytic ionization process with copper and silver electrodes.
Its operation is based on the application of a low-voltage electric current on a copper-silver alloy electrode, generating the controlled release of metal ions in the hydraulic circuit of the installation.
The equipment is permanently installed in the return pipe of the filtration system, operating automatically while the recirculation pump is in service.
Thanks to its continuous operation, the ionizer contributes to the maintenance of stable water conditions and can help optimize the use of products commonly used for the maintenance of swimming pools, spas, aquariums and ponds, always in accordance with the manufacturer’s recommendations and the applicable regulations.
Its low-voltage 12 V power supply provides easy installation and operation with very low power consumption.
The ADTECSO Installation Ionizer incorporates a high-quality copper-silver alloy electrode designed to offer long life and stable operation.
The electronic controller supplies a low-intensity direct current that produces the gradual release of metal ions through an electrolysis process.
These ions are transported by the flow of water through the recirculation system.
The equipment is designed to work in conjunction with the existing filtration system, without significantly modifying the hydraulic installation.
Its operation independent of solar radiation allows it to be used both in outdoor pools and in indoor installations, spas, aquariums or ponds.
The equipment is installed in the return line of the filtration system.
When the pump is in operation, the controller feeds the electrode with a voltage of 12 V, initiating the ionization process.
The ionization intensity can be adjusted from the control panel to suit the water volume and operating conditions of each installation.
For proper operation, it is recommended to periodically check:
- pH
- Alkalinity
- Copper level using compatible test strips
The adjustment of the ionization level should be made according to the results obtained in these measurements.
Features:
- Permanent installation in the return pipe.
- Safe power supply at 12 V.
- Low power consumption.
- Long-lasting copper and silver electrode.
- Electronic regulation of the level of ionization.
- Compatible with existing filtration systems.
- Easy installation.
- Continuous operation together with the filtration pump.
- Reduced maintenance.
- Easy electrode replacement.
Equipment Benefits:
- It contributes to water conditioning through a physical process of ionization.
- It can help optimize the use of products intended for regular water maintenance.
- Quiet operation.
- Low energy consumption.
- Permanent installation.
- Suitable for swimming pools, spas, ponds and aquariums.
- Easily replaceable electrodes.
- Compact and robust equipment.
Maintenance:
To maintain the performance of the equipment, it is recommended to:
- Clean the electrode periodically.
- Replace the electrode when it wears.
- Regularly check the copper level using test strips.
- Keep the water parameters within the values recommended by the manufacturer.
Applications:
- Private pools
- Spas
- Ornamental ponds
- Aquariums
- Decorative water circuits
Our Adtecso Installation Ionizer for Swimming Pools, Spas, Aquariums and Ponds is extremely economical. It only requires the replacement of the mineral electrode, which lasts approximately 1 to 2 years. Replacement is very simple and inexpensive too. This installation Ionizer will allow you to reduce chemical consumption. The natural and ionized quality of water has fantastic benefits.
The Adtecso Installation Ionizer for swimming pools, spas, aquariums and ponds, in addition to generating beneficial mineral ions, also collects undesirable minerals such as calcium and iron. This has the effect of improving the water. The mineral electrode is designed to erode slowly, and in the process forms scale build-up that requires occasional cleaning (every 15 days approx.)
Each device is designed to cover up to 150m3 of water (35,000 gallons).
Especificaciones:
- Item: Installation ionizer for swimming pools, spas, aquariums and ponds.
- Yield: 200L/Hour.
- Capacity: 150 m3 or 35K Gallons
- Material: PP.
- Weight: 3 Kg.
- Size: 50 x 35 x 47.
- Warranty: 3 years.
- Application: Ionization and purification of water.
- Color: Black.
Components:
